01246 860627                      01246 860627


Industrial & Commercial

At Ashton Plumbing & Heating, we recognize our customers have special requirements — whether it’s installation or the repair to industrial plumbing or Heating System. With our vision, our skills, we have developed the capabilities and processes to not only satisfy our clients but to provide them with value-added services. Our company continues to focus on timely service, fair pricing and personal attention.


Under Floor Heating

Under floor heating is considered the best modern way to heat your home, not only is it less obtrusive and more energy efficient than ugly radiators but it’s also good for your health!

Using warm water pipes that are entirely concealed in the floor of the property, gently radiating heat evenly throughout the room, ensuring that there are no cold spots or excessively hot spots. Gas Underfloor heating gives you the freedom to re-position furniture as you please without worrying about where the hot radiators are positioned.


Unvented Hot Water Systems

These are for use in many homes around the UK. Unvented cylinders operate directly from the mains water supply, providing a high pressure flow of water and can use an immersion heater to supplement the heating of the water. An unvented cylinder has built in safety measures to help support the high water pressures.
The advantage of an unvented cylinder is that no additional tanks are required. Hot water can be provided constantly by the cylinder at mains pressure. Also, an unvented cylinder can be positioned in any suitable location as no other forces such as gravity are affecting the flow of water. The fact that an immersion heater is used to heat the water means that there is less reliance on the boiler.


Servicing and Maintenance

Ashton staff have many years of experience in the heating industry. Qualified service engineers have access to a wide range of spares to ensure a rapid and effective response to any emergencies.

Your boiler is a vital element of your happy home, especially when the cold weather sets in. We understand this and therefore we promise to get your boiler repaired as quickly as the issue will allow. We take the most fuss-free route and give you the best price we can on all boiler repairs.

Boiler servicing runs on similar principles as a car, it is vital that sufficient servicing is carried out every 12 months to ensure its life span remains as long as possible and also that it is still operating safely.

During this service the engineer will check things such as the following:

- Boiler Controls and basic components
- Visual inspection to look for signs of corrosion or other clear faults
- Strip down, clean and inspection of vital boiler parts
- Ensure a sufficient seal is still maintained surrounding the boiler
- Flue Gas Analyser test shall be carried out to ensure your boiler is running as efficiently as it possible.

Servicing & Maintenance can be carried out:-
- As & when you request (You call us!)
- By regular annual visit (We call you!)


Power Flush

A build up of corrosion in your system can create a sludge that really affects the efficiency of your boiler. This one-off deep clean makes sure your radiators heat up properly and there are no more cold spots. This helps to increase the life of the whole system, keeps heating bills down and reduces the risk of breakdowns.

We can also offer you the Magna Clean OPTION to be fitted on all installations.


Pipe Fitters

We carry out installation of all types of plumbing, including welding threading steel/iron pipe-work to soldering and brazing copper tube, not forgetting the vast types of plastic.


Commercial Boiler Repairs / Commissioning

With a team of fully qualified commercial engineers, we are able to provide an excellent fault-finding diagnostic for your system and recommend, as well as undertake all repairs for your boiler or plant room equipment.

Depending on the size and complexity of your boiler system, our engineers will conduct an onsite visit to diagnose the problem and to assure that we get the right parts first time round in order to get your boiler back up and running as soon as possible.


Commercial Gas Safety Checks / Certificates

Should you require a Landlord’s Gas Safety Certificate (CP12), our expert gas engineers are qualified to check industrial and commercial appliances.

Landlord’s Gas Safety checks can be carried out alongside the annual servicing of your commercial gas appliances, or separately if required.

We will provide gas safety certificates for your records.



Installation, Maintenance, Repairs, Servicing, Controls, Wiring



Installations, Maintenance, Thermostatic valves (TRV), Venting, Balancing, Replacement
Cylinders Vented & Unvented – Installations, Maintenance, Repairs, Immersion Heaters, Wiring, Controls


New Boilers

Ashton Plumbing can meet every heating requirement you may have from a simple boiler change to a full central heating design and install.

All of our engineers who carry out maintenance on customer boilers have undergone sufficient training and hold a Gas Safe qualification.
All of this is supported by our very own warranty on all works completed for your own peace of mind. Further benefits of installing a new more efficient boiler include:

- Up to a 10 year warranty on specific boilers installed
- Cosmetically more pleasing upon final installation
- Property value increase and more desirable for potential buyers
- Safe and Reliability increase
- Save you money through reduced Gas bills
- Generate heating and hot water whenever you need it

Call us today to arrange a FREE, No Obligation Quotation!
From this you will be able to speak to one of our qualified surveyors who will answer any questions or concerns you may have.

Print Print | Sitemap
© Ashton Plumbing